Qualcomm recently announced the QCA64x1 series of 802.11ay 60 GHz Wi-Fi chipsets, noting “truly immersive wireless virtual and augmented reality experiences” among the list of use cases.
60 GHz offers far superior bandwidth to typical home-use 5 GHz networks, but with the trade-off that it cannot penetrate walls. Typical home WiFi uses relatively low frequency 2.4 GHz and 5 GHz, and while this is great for achieving good coverage throughout your home even through thick walls, it’s not optimal for short distance ultra high bandwidth applications like wireless displays and PC VR.
802.11ay is the successor to 802.11ad, the previous 60 GHz WiFi standard, commonly known as ‘WiGig’. WiGig is the technology used in the HTC Vive Wireless Adapter. WiGig has a theoretical maximum bandwidth of around 7 Gbit/sec. While this is technically just enough to transmit the 2160×1200 90Hz signal of the HTC Vive, in real world conditions it might fall short. One solution is to use compression which is not noticeable in most scenarios, but the 802.11ay upgrade could increase this theoretical maximum to 40 Gbit/sec, which even in real world conditions should be more than enough to send a current VR headset’s display signal without compression. In theory, with compression added it could make a future higher resolution PC-powered headset wireless.
It is important to note that Qualcomm’s QCA6421 & QCA6431 may target a lower maximum than the specification allows.
Qualcomm’s marketing highlights VR as a use case of these new chips
Neither 802.11ay nor WiGig are replacing standard WiFi of the kind your router would use. There’s another upcoming standard called 802.11ax (“Wi-Fi 6”) intended to upgrade standard home wireless. Instead, the 802.11ay standard is intended only for niche applications like wireless displays, because they prioritize bandwidth over wall penetration.
Qualcomm has not given any specifics on when we might see the QCA6421 and QCA6431 in consumer products, but the fact that these chipsets are now finalized and available to electronics companies to integrate into products suggests it could be as early as 2019.
For wireless PC VR to keep up with increasing resolutions (until eye-tracking and foveated rendering is available) companies need to continue to push wireless bandwidth higher and higher, and with the 802.11ay QCA64x1 series, that’s exactly what Qualcomm is doing.
Tagged with: qualcomm
The post Qualcomm’s New Chips Should Enable Better Wireless VR appeared first on UploadVR.
via Mint VR